The Principle Of Electric Vehicle Charging Pile Is Revealed
The charging pile, whose function is similar to the refueling machine in the gas station, can be fixed on the ground or the wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, can be charged for various types of electric vehicles according to different voltage levels. According to the charging method, the charging pile can be divided into DC charging pile, AC charging pile and AC DC integrated charging pile. Let's take a look at the principle of electric vehicle charging pile.
1. Charging principle of charging pile
The charging pile is fixed on the ground, and the special charging interface and conduction mode are used to provide AC electric energy for the electric vehicle with the on-board charger, which has the corresponding communication, billing and safety protection functions. Citizens just need to buy an IC card and recharge it, then they can use charging piles to charge their cars.
After electric vehicle battery discharge, direct current is used in the opposite direction of the discharge current through the battery, so that it can restore the working ability, this process is called battery charging. When the battery is charged, the positive electrode of the battery is connected to the positive electrode of the power supply, and the negative electrode of the battery is connected to the negative electrode of the power supply. The voltage of the charging power supply must be higher than the total electromotive force of the battery.
2. Charging mode of charging pile
There are two charging modes: constant current charging and constant voltage charging.
Constant current charging method
Constant current charging method is the method of adjusting the output voltage of the charging device or changing the series resistance with the battery to keep the charging current intensity unchanged. The control method is simple, but because the acceptable current capacity of the battery is gradually decreased with the charging process, to the late charging, charging current is mostly used for electrolytic water, gas generation, so that the gas is too much, therefore, often choose the stage charging method.
Constant voltage charging method
The voltage of the charging power supply maintains a constant value during the whole charging time. With the gradual increase of the terminal voltage of the battery, the current gradually decreases. Compared with the constant current charging method, the charging process is closer to the optimal charging curve. With constant voltage fast charging, due to the initial charging battery electromotive force is low, charging current is very large, with the charging, the current will gradually reduce, therefore, only a simple control system.





